Vertical slurry pump introduction
vertical slurry pump
1. Slurry pumps
Amostech ® pumps are vertical, centrifugal slurry pumps submerged in sump to work.They are designed for delivering abrasive,large particle and high density slurries.These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.Wet parts of type NP-SP pump are made of abrasion-resistant metal. All parts of type NP-SP(R) pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle abrasive slurry.
1. Vertical type centrifugal slurry pumps
2. Application for sump pumping, Single stage pump
2. Application for sump pumping, Single stage pump
centrifugal slurry pumps are mainly used to pump high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc.
2. Specification
D: 40-200 mm
Q: 17-891 mm
H: 4-37 m
3. Function:
1. Wear-resistant metal, the impeller selection of wear-resistant metal or rubber material.
2. sump pump parts, immersed in liquid rubber lining.
3. Different length of the pump drive shaft or inhaled could be selected
4. V-belt drive, direct drive, and flexible coupling.
5. Bearing to lubricate oils.
6. use of variable-speed, the best condition in the pump operation, long service life, run- effective,meet many bad transportation conditions.
5. Bearing to lubricate oils.
6. use of variable-speed, the best condition in the pump operation, long service life, run- effective,meet many bad transportation conditions.