News

10 sets of Vertical Slurry Pump Are Ready For Shipping the Site

Vertical slurry pump is a cantilever sump pump,Which work submerged to transport high abrasive and high density slurries with large particles.It doesn’t need any seal water. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design.and suction agitator is also available.

The  vertical slurry pump is a vertical type slurry pump. The inlet is oriented vertically and downward on one side of the vertical pump, and the outlet is oriented vertically and upward on the other side. It composed of the lower filter platform, pump body, impeller, shaft, guard plate, and bracket. The upper part of the  pump is supported by bearings; the pump is installed under the liquid, and no shaft seal is used. It uses a belt drive (BD) and direct drive (CD) transmission type. The depth of the immersion liquid in the standard size range can be adjusted according to the needs of the user.

Design features:
1. Vertical sump pumps are vertical, centrifugal slurry pumps submerged in sump to work.
2. They are designed for delivering abrasive, large particle and high density slurries.
3. These pumps have no need of any shaft seal and sealing water.
4. They can also be operated normally for insufficient suction duties.
5. Wet parts of type metal vertical slurry pump are made of abrasion-resistant metal.
6. All parts of type rubber lined vertical slurry pump immersed in liquid are lined with rubber outer liner. They are suited
7. To transport non-edge angle abrasive slurry.